Model No.: HY2000A/HY2500A/HY2700A/3400A
Brand: QIUXUE
Place Of Origin: China
Types Of: Synthetic Resin And Plastics
RELATED VISCOSITY: 2.45
Color: Raw White
Packing: 25kgs Or 800kgs Jumbo Bag
Packaging: THE INNER LAYER IS ALUMINUM FOIL AND THE OUTER LAYER IS PP OR KRAFT BAGS.
Productivity: 30000 TONS PER MONTY
Transportation: Ocean,Land,Air
Place of Origin: CHINA
Supply Ability: 350,000 TONS PER YEAR
Certificate: ISO9000,ISO14001
HS Code: 390810
Port: SHANGHAI,TAICANG,ZHANGJIAGANG
Payment Type: L/C,T/T,D/P
Incoterm: FOB,CFR,CIF,EXW
The viscosity of Polyamide Nylon 66 is sensitive to temperature changes. Nylon Pa6 shrinks between 1% and 2%. Adding glass fiber additives can reduce the shrinkage to 0.2%~1%. The flow direction and the contraction perpendicular to the flow direction are quite different. Thermal Properties of Polyamide Nylon 66 Melting point is the temperature at which the crystals melt. For the crystalline polymer PA66 plastic, it shows a well-defined melting point. Depending on the test method used, the melting point fluctuates between 259 and 267°C. The melting point of Nylon 66, usually measured by differential thermal analysis, is 264°C. The melting point temperature of nylon 66 is 246-263°C, and the temperature at which the volume expansion coefficient shows the maximum value is the melting point. Close to the theoretical melting temperature of 259°C. Injection molding characteristics of dry Nylon 66 Material: If the material is sealed before processing, no drying is required. However, if the storage container is open, drying in hot air at 85°C is recommended. If the humidity is greater than 0.2%, vacuum drying at 105°C for 12 hours is required.
| NO | ITEM | NORM | DATA |
| 1 | VISCOSITY | Q/321200WLB001—2019 | M±0.04 |
| 2 | MONOMER CONTENT(% ) | Q/321200WLB001—2019 | ≤0.6 |
| 3 | MOISTURE CONTENT(% ) | Q/321200WLB001—2019 | ≤0.06 |
| 4 | AMINE END GROUPS(Meg/kg) | Q/321200WLB001—2019 | 40±3 |
Product Categories : Nylon 6 Chips > Bright Nylon 6 Chips
BRIGHT NYLON6 CHIPS IS WIDELY USED IN ENGINEERING PLASTIC AND TEXTILE GRADE.ITS VISCOSITY IS FROM 2.0 TO 3.45.ITS ADVANTAGE IS GOOD APPEARANCE, GOOD SPINNING ABILITY,HIGH STRENGTH AND HIGH DYEING PERFORMANCE.WE PRODUCE THE PRODUCT VIA HIGH HIGH-END LIQUID MATERIALS WHICH IS IMPORTED FROM USA, JAPAN, THE NETHERLANDS, ETC., WITH VK CONTINUOUS POLYMERIZATION, UNDERWATER GRANULATION, CONTINUOUS AIRFLOW DRYING, DCS CONTROL AND OTHER TECHNOLOGIES.THE AMINO TERMINAL GROUP, MONOMER CONTENT AND OTHER SPECIFICATION ARE BETTER.
WHY CHOOSE US:
1. WE ESTABLISH IN 1970,WITH 50 YEARS’ EXPERINCE IN PA6 FIELD.
2. 1600 EMPLOYEE
3. OUR SALES AMOUNT IN 2020 IS MORE THAN USD400.00 MILLION
4. WE HAVE ISO9000,ISO14001,IATF16949,REACH,ROHS,TFS CERTRIFICATE.
SPECIFICATION:
|
NO |
ITEM |
NORM |
DATA |
|
1 |
VISCOSITY |
Q/321200WLB001—2019 |
M±0.04 |
|
2 |
MONOMER CONTENT(% ) |
Q/321200WLB001—2019 |
≤0.6 |
|
3 |
MOSITURE CONTENT(% ) |
Q/321200WLB001—2019 |
≤0.06 |
|
4 |
AMINE END GROUPS(Meg/kg) |
Q/321200WLB001—2019 |
40±3 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now