Product Categories
(Total 12 Products for Pa6 Pure Black Particles)
Yarns use in-situ PA6 virgin black grain
Nylon 6 is a crystalline polymer material.
Nylon Pa6 is also known as Nylon 6. Its monomer is caprolactam, which is a polymer compound polymerized from caprolactam. Nylon 6 has the characteristics of thermoplasticity, light weight, good toughness, chemical resistance and durability, and is generally used in automobile...
Yarns use in-situ PA6 pure black resin
The key points of nylon 6 chip packaging, storage and transportation are as follows:
1. Slices are packed with moisture-proof and oxygen proof materials and suitable for long-distance transportation. Net content of each bag is (25 ± 0.25) kg or
Ton bag
(750±1.5)kg。 The average net content of each batch of products...
Bright PA6 Granules for Engineering Plastics
The main varieties of polyamide fibers (aliphatic) are Nylon 66 and Nylon 6, the latter also known as nylon. They have high strength, good resilience, the highest abrasion resistance among textile fibers, and the resistance to multiple deformation and fatigue is close to that of polyester and higher than other fibers....
Nylon 66 material is widely used in engineering plastics and textile grades. Polyamide nylon 66 has a viscosity of 2.0 to 3.45. Brown 840d/2 Nylon66 cord fabric has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported from...
BRIGHT PA6 native chips for engineering plastics
Physical properties: Polyamide Nylon 6 slices, commonly known as Nylon 6 slices, Nylon 6 slices. Because macromolecules contain amide bonds (one CO—NH—), they are called polyamides. Nylon 6 slices are usually white columnar granules with a melting point of 210-220 °C and a decomposition temperature of about 300 °C. It...
In-situ use of yarn PA6 black particles
The first batch of large-scale production in the world
Principle: Colored Nylon 6 Yarn dye and melt are fully mixed during polymerization, and colored yarn is obtained by spinning.
Advantages: Colored Polymaide6 Yarn does not dye after weaving, does not discharge dyeing sewage, saves water, saves energy, and is green...
YARN USE in-situ bright PA6 black particles
For the first time in the world, Pa6 Black Chips was used for mass production of yarn.
Principle: In situ Pa6 Black Chips dye and melt are fully mixed in the polymerization process, and colored yarn is obtained by spinning.
Advantages: Yarn Use Pa6 Black Chips has no dyeing after weaving, no discharge of dyeing...
The yarn uses in-situ semi-dull PA6 black particles
The world's first nylon 6 pellets for mass production of yarns
Principle: In-situ Pa6 Black Chips dye and melt are thoroughly mixed during polymerization and spun into colored yarns.
Advantages: Virgin Pa6 Granules Textile Grare does not dye after weaving, does not discharge dyeing wastewater, saves water, energy, and...
yarn use in-situ semi dull pa6 black resin
Injection grade modified Nylon Pa6 slice highlights here:
1. Nylon 6 has good fluidity in the whole process of raw material melting, conveying and injection, and its energy consumption should be as low as possible.
2. On the premise of ensuring the product performance, the molding cycle of In situ Pa6 Black Chips...
BRIGHT R.V2.45 PA6 Granules for Modified Polymers
In-situ Pa6 black flakes are widely used in engineering plastics and textile grades. Pa6 Black Chips have a viscosity of 2.0 to 3.45. The advantages of Yarn Use Pa6 Black Chips are good appearance, good spinnability, high strength and good dyeing properties. The products we produce use high-end liquid raw materials...
BRIGHT R.V2.7 PA6 Granules for Modified Polymers
Yarn Uses Pa6 Black Chips are widely used in engineering plastics and textile grades. Colored nylon 6 chips have a viscosity of 2.0 to 3.45. The advantages of colored 420d nylon yarn are good appearance, good spinnability, high strength and good dyeing performance. The high-strength 420d nylon yarn we produce adopts...
BRIGHT PA6 R.V2.7 Primary Granules for Polymers
Polyamide nylon 66 is widely used in engineering plastics and textile grades. Nylon 66 has a viscosity of 2.0 to 3.45. The advantages of nylon 66 material are good appearance, good spinnability, high strength and good dyeing performance. The nylon 66 we produce adopts high-end liquid raw materials imported from the...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
